Why is my model not on the site?

🔍 Your machine may already be supported - under a different name

The same models are sold under different names. For example, Jetour Traveler, Freedom and Shanghai T1 are other names already supported Jetour T2 and Jetour T1 Jetour X90 Plus. If in doubt, write to support, we’ll check it against the photo of the GU.

🔒 The manufacturer closed the installation

On these machines, access to debugging is cut out of the firmware or the USB port is closed by software - Browser installation is not possible, and there is no “magic code”, no matter what they promise advertisements.

• EXEED TXL / TXL FL - debugging is removed from the firmware
• EXEED VX FL 2023 - switch disabled by manufacturer
• Chery Tiggo 8 Pro / 8 Pro Max (RF) - interior USB port closed
• OMODA S5 GT - port only charges
• Changan restyling 2026 (UNI-Z, UNI-V, CS55 Plus, CS75 PRO) - the code is tied to the VIN and is issued by a paid third-party server

📡 We need a way that the browser can’t

Installation via the site works via a USB cable (WebUSB technology). Some machines are debugging is available only via Wi-Fi or it is not at all in the service menu - here our tool is powerless, This is a limitation of the platform itself, not the site.

• OMODA C5 - network debugging only, USB connection not provided
• OMODA C7 - in the service menu there is only diagnostics, no debugging
• Geely on new systems (OS 2.0 / 2.2.0) - debugging is enabled via Wi-Fi

🕰 Android is too old

It is technically possible to install applications, but modern versions of Navigator, Music and video services on Android 4.x simply will not start - sell the “installation”, after which nothing works, we won't.

• Jetour X70 Plus in Comfort / Prestige trim levels - Android 4.x
• Changan CS35 Plus pre-style (2019–2022) - Android 4.4

⚙️ Other hardware

Almost all head units run on ARM processors - ours are also built for them applications. There are exceptions on x86: there you need a separate set of assemblies, which not yet.

• Haval Jolion - Intel x86 processor, standard application builds are not suitable

⚠️ Too high a risk for the car

For these models, the installation method is known, but according to the experience of the owners, it is dangerous for themselves. head unit. We deliberately do not publish instructions that could cause multimedia to brick or break standard functions.

• Changan CS35 Plus NEW - tiny section for applications, overflow can damage the GU
• Jetour X90 Plus (2.0, pre-restayl) - after installing several applications, the owners' stock radio and volume control from the steering wheel break down

🔧 Only with equipment - but there is a way out

For these machines, the engineering menu is opened only through diagnostic equipment (OBD scanner) or with a special key - this cannot be done from the browser. If you have one car, write to support - let's discuss the options.

• Haval F7 second generation (2024–2025) - only via OBD scanner
• Haval H9 second generation - only via OBD scanner
• GWM Tank 300 / 500 - only via OBD scanner
• Tenet T8 - debugging opens with a key file for a specific VIN and disappears after a reboot

⏳ Just haven’t checked yet

If your model is neither higher nor in list of supported - Most likely, we haven’t gotten to it yet. Verification usually takes a couple of days: we collect data from several independent sources and publish the method only after verification. Write to Telegram - models who ask more often, We check first. And if you already have a method proven on your machine - even more so write: with field data, adding is greatly accelerated.